宏盛自动化机械有限公司 回主页

CNC海绵切机,电脑切机,压型机,  海绵机,箱式发泡机, 再生机,海绵破碎机,碎绵机


海绵切机

圆盘机

This machine for quickly cut foam block into thin sheets. put the foam on the round table, start the machine, the blade will run, and the the table will run also, once one circle finish, the table stop and the blade shelf down one step(For example you want cut 5mm, the shelf will down 5mm for each turn of the round table.) then stop, then the round table running again. until all the block finished. You can put 4 or 5 block on the table one time.

海绵圆盘机用于块状海绵的切片作业. 因不需回刀,相对于其他海绵切片机械速度快效率高.一次可放多块海绵进行切割.

台山宏盛自动化机械有限公司圆盘机运用PLC和人机界面控制系统,使操作更简便,控制更精确,切割精度高。

circle cut machine 

立切机

This machine normal for divide big foam block into small piece, Also for cleaning the side of the block

the blade of this machine is in vertical position

海绵立切机主要用来分且大块海绵为小块,或用于清理海绵侧边毛边。

vertical cutting machine 

平切机

 This machine same like the circle machine, cut the big block foam into thin sheet.  But this machine need small place, and low cost compare with the circle cut machine.   

海绵平切机,也是用来给大块海绵切片。但相对于圆盘机占地面积小,价格便宜。

台山宏盛自动化机械有限公司平切机运用PLC+人机界面控制系统,使切割精度更准,操作更简单

horizontal machine 

电脑切割机(刀片型)

此机利用先进准确的伺服+电脑控制系统。在电脑上画上所想要图形即可进行切割。

此机利用刀片切割,没有粉尘,速度快,精度高。

刀片电脑切割机

电脑切割机(线刀型)

This machine controlled by computer, You can make your drawing in the computer then the computer will cut the foam according to your drawing. This machine has one type of wire, this wire is drived by 4 wheel, when the foam touch this wire, the foam can be cut.

Maxtech automation machinery  make the program are very easy to operate. a worker which has only 3 years at school can learn this machine within half days. Also if you are skilled in Auto Cad, you can make your drawing with Auto cad. Make your drawing into Auto Cad will be much flexible for drawing.

电脑切割机,运用工控电脑+伺服电机控制技术。操作者只需在电脑上做简单绘图即可按电脑图纸切割出想要的图形。相对于手工图形切割机械效率提高很多,操作省心省力。可切任意二维图形。通过反转海绵还可切简单三维图形。

CNC foam cutting machine 

电脑切割机(热丝型)

This is also one type of CNC machine, but this machine cut foam by hotwire.  Also you need only make your drawing in the computer then cut the foam by computer. because it is hotwire, so this machine can cut also the EVA or polyfoam

热丝电脑切割机,运用电热丝进行海绵切割。控制采用工控电脑+伺服系统。因采用热丝,故除可切割普通海绵外也可切割泡沫塑料,EVA等。

Hotwire cut machine 

路轨机

Another name of this machine is the rail foam cut machine or slider foam cutting machine. same like the horizontal cutting machine, this machine cut foam into thin sheets. But the table on this machine not move, the blade frame move forward and backward on the rail, then you can cut 50 meter or longer foam.

long sheet foam cutting machine

卷切机

By this machine you can get very long sheet foam. This machine can cut the cylinder foam into thin sheet.

海绵卷切机,像剥萝卜皮一样把海绵一层一次的向外剥,即可获得统一厚度的很长的卷绵。

peeling machine

压型机

Cut the foam as a lot of egg on top of the foam.       

profile cut